Didisolar manufacturer is supplying a new generation of intelligent Whole house solar power system . It has an intelligent display, which can show not only daily power generation, cumulative power generation and real-time operating parameters, but also fault records. It can be selected between AC priority and PV priority. You can also choose AC charging mode or PV+AC to charge the battery. What’s more, the MPPT controller is with low loss, which can increase power generation by 25%.
Max input power 10KW
DC input voltage range 96V
Rated DC input current 60A
AC output voltage range 310-450VAC(Un=380)
Output frequency range 48-51.5Hz(Fn=50)
Discharge way Constant power discharge(output frequency adjustable)
Charge way Constant voltage/constant current(charge voltage adjustable,charge current adjustable)
Charging and discharging mode adjust according to the grid
Power consuming/power consuming at night <10W
Required grid mode 3phase 4wire
Output current wave distortion <3%
Power factor >0.99
Automatically operating condition
Fault handled 3Min
Automatically switch to off-grid mode after power failure
isolated transformer (yes/no) yes
ground fault test(yes/no) yes
Output overload protection(yes/no) yes
DC over/under voltage protection(yes/no) yes
AC over/under voltage protection(yes/no) yes
Over/under frequency protection(yes/no) yes
other protection anti-island,current limit,over current,overheat
Temperature range －20℃～＋55℃
Off-gird output rated parameter
Output voltage 380V
Output frequency 50Hz
Humidity 0～95%，non-condensing
The highest full load operating altitude <=2000m
protect degree IP20
cooling method Wind cooling
Displaying Touch screen
communication port Ethernet(ModbusTcpIp)
